top of page

TIMED CONDENSATE DRAIN

EZ1 Timer Controlled Drain c/w Ball Valve Strainer

 

EZ1: A Low cost reliable timer controlled condensate drain, with analogue timer and test feature.
Comes with a Ball Valve Strainer as standard.
Does not airlock during operation.
Compressed air systems up to any size.
0 bar - 16 bar Working pressure.

See Technical Data Sheet for full specification.

FLUIDRAIN Timer Controlled Drain

 

FLUIDRAIN: Reliable timer controlled condensate drain, with analogue timer and test feature.
Does not airlock during operation.
Compressed air systems up to any size.
0 bar - 16 bar Working pressure.

See Technical Data Sheet for full specification.

FLUIDRAIN St/Steel Timer Controlled Drain

 


FLUIDRAIN S: Reliable timer controlled condensate drain, with analogue timer, test feature and stainless steel valve.
Designed to remove condensate from compressed air systems and systems that require stainless steel valves (food industry etc.).
Working pressure: 0 - 16 bar.

See Technical Data Sheet for full specification.

FLUIDRAIN-COMBO Condensate Timer Drain & BV Strainer

 

FLUIDRAIN-COMBO: Reliable timer controlled condensate drain with analogue timer and unique valve with integrated ball valve & strainer.
 
Duel thread inlet 1/2" & 1/4"
Does not airlock during operation and is suitable for use up to 16bar.
Time cycle range (ON-OFF) 0.5/10 seconds - 0.5/45 minutes.

See Technical Data Sheet for full specification.

FLUIDRAIN COMBO-D-LUX Digital Timer Drain & BV Strainer

 

FLUIDRAIN-COMBO: Versatile timer controlled condensate drain with digital timer and unique valve with integrated ball valve & strainer.

Does not airlock during operation.
Exceptionally accurate cycle timing.
Use with compressed air systems up to any size.

See Technical Data Sheet for full specification.

FLUIDRAIN COMBO QUICK SET Timer Drain & BV Strainer

 

Simply select the compressor capacity and pressure - and GO!

Suitable for all compressed air systems up to 16 bar.
Integrated ball valve strainer, direct acting valve assembly, ensuring consistant discharge operation.
12 - 380 VAC/DC options available.

FLUIDRAIN Wall Mounting Bracket

 

Wall mounting brackets allow easy installation of timer drains to walls or inside dryers etc.
The bracket kit contains all necessary fixings to complete the job.

FLUIDRAIN Timer Drain Service Kit

 

Service Kit consists of the complete valve assembly.
Can be used in Fluidrain and Kaptiv CS zero loss drains up to 16 bar.

FLUIDRAIN & COMBO Spare Coils

 

code            coil type          voltage              watts

42300      JCM        240 vac          10

42320      JCM        115vac           13w 

42350      JCM        380vac            7w

42360      JCM        24vac              10w 

295400   TM          3024vdc         10w

42400      JCL          230vac           16w

42420      JCL          115vac           16w

42460      JCL          24vac              16w

42480      JCL          24vdc              18w

297500    TM         3512vdc          19w

FLUIDRAIN & COMBO Spare Plug Connector

 

Form A Plug (Square).

TEC-11 In-Line Timer Drain for Filters

 

TEC11: Compact in-line timer controlled condensate drains for filters.

Fixed ON cycle and adjustable OFF cycle, 2 seconds - 1/120 minutes.
Medium pressure up to 16 bar (optionally up to 21 bar).


See Technical Data Sheet for full specification.

TEC-11 Filter Adaptors

 

Installation adaptors simplify the job for the Installation Engineer.
JORC offer a range of adaptors to suit all filters (even those that do not have threads in the bowl).

 

code                     size

9061                      18mm

9060                      20mm

TEC-11 Service Kit

 

Service Kit to suit TEC-11 In Line Filter drains.

TEC-11 Spare Coils

 

Rectangular Din 43650-B type coils.

 

 

  code    coil type        voltage   watts

42100        JCS               230vac       6w

42120        JCS               115vac        6w

296001     JCS                48vac          5w

296301     TM25           24vac          7w

296401     TM25           24vdc          9w

TEC-11 Spare Plug Connector

 

Form B Plug (Rectangular)

Plug Connector Form B to Form A Adaptor

 

Allows you to use a square form A cap onto a rectangular form B coil.

FLUIDRAIN Analogue Timer Unit

 

Connects to DIN form A square type coils.
ON time: 0.5 - 10 sec adjustable.
OFF time: 0.5 - 45 min adjustable.
Multivoltage: 24 - 240 vac

FLUIDRAIN Digital Timer Unit

 

Connects to DIN form A square type coils.
ON/OFF time: Digitally adjustable 0.01 sec - 99 hours..
110 - 240 vac/dc.

Also available in 10 - 48 vac/dc & 48 - 115 vac/dc.

TEC-11 Mini Timer Unit

 

Connects to DIN form B rectangular type coils.
Multivoltage: 24 - 240 vac.
ON time is fixed, OFF time is adjustable.

Ball Valve L Type Strainer

 

Use with Fluidrain drains.
40 bar pressure rating.
Dual Inlet thread 1/2"male/1/4"female.
Choice of outlet threads.

In Line Ball Valve & Y Strainer

 

Use with Zero loss drains.
Inlet thread 1/2" Female.
Outlet thread 1/2" Male.

SEPREMIUM 2 Disposable Condensate Seperator

 

Max Compressor capacity: 2 m3/min 70 cfm.
High performance filtration materials.
Simple, fast and clean installation and maintenance procedure.
Seperates mineral oil, synthetic lubricants and stable emulsions.
Holding bracket included for wall mounting.
Brass 1/2" hose connections for easy installation/servicing.

Special versions available for Ultra-Coolant, Sigma Mol and Roto-Inject applications.

PURO MINI Condensate Seperator

 

The PURO MINI range of oil/water separators, separates oil from condensate, generated by the compressed air system

Alarm indicator.
Sample bottle and test drain for output testing (ppm value).
Operates with all JORC type drains (both timer controlled and zero air loss).
Small foot print.

See Technical Data Sheet for full specification.

SEPREMIUM 5 Condensate Seperator

 

The SEPREMIUM range of oil/water separators, separates oil from condensate, generated by the compressed air system

Multiple condensate inlets.
Alarm indicator.
Sample bottle and test drain for output testing (ppm value).
Operates with all JORC type drains (both timer controlled and zero air loss).
Small foot print.

See Technical Data Sheet for full specification.

SEPREMIUM 10 Condensate Seperator

 

The SEPREMIUM range of oil/water separators, separates oil from condensate, generated by the compressed air system

Multiple condensate inlets.
Alarm indicator.
Sample bottle and test drain for output testing (ppm value).
Operates with all JORC type drains (both timer controlled and zero air loss).
Small foot print.

See Technical Data Sheet for full specification.

SEPREMIUM & PURO MINI Service Packs

 

Sepremium Service packs consist of:

1 x Indicator white element (1st tower).
1 x White element (2nd tower).
1 x Active carbon element (2nd tower).
1 x Clothing kit (mouth cap, latex gloves and plastic overall).

SEPREMIUM Test Kit

 

Potential complicated compressor systems, i.e. 2 different compressor brands with different lubricants could make it difficult to determine which elements to use. This self-test kit will enable you to determine the right unit and to demonstrate its effectiveness to your customer prior to installation.

The test kit consists of a universal kit for all types of lubricants, any type of compressor, etc.

The test is quite simple to carry out and a detailed instruction manual is provided.

bottom of page